Description: 1" 3M PS Prem Perf Hook- black
Application: Adhesive backed products should be applied to above 68 F (20 C) to surfaces that are smooth, dry and free of oils or mold release agents. It is recommended to wipe the substrate with an isopropanol/water solution (50/50) or with heptane or methyl ethyl ketone) and allow to dry. With firm roller pressure, apply scotchmate allowing an appropriate dwell time at room temperature before loading or disengaging. Do not touch adhesive after liner is removed. To increase resistance to edge lifting, round the corners or recess products to substrate.
Product Cold Crack: Equal to or greater than -28 degrees Celsius (-18 Fahrenheit)
Content: 100% Nylon
Description: 3M Premium 1" Pressure Sensitive Hook . The woven hook is covered with with tiny, stiff hooks, about 300 hooks per square inch (46/ sq.cm).
Minimum Dwell Time: 48 hours. Full strength reached after 72 hours.
Features: Preshrunk to insure maximum dimensional stability and flatness. Coated on the backside with a high temperature acrylic pressure sensitive adhesive designed to function over a range of temperatures and humidity. This adhesive is especially suited for attachment to bare metals and a variety of substrates.
Flammability: Meets the requirements of F.A.R. 25.283 (b-3) and FMVSS-302 as is unattached and F.A.R. 25.283 par (b), (b-2), (b-3), and FMVSS-302 when attached to a thin metal panel. Tested and recommended on base metals,painted metals, polystyrene, acrylic, polycarbonate, rigid vinyl and glass.
Peel Cleavage Peel Strength: "t-Peel" 1.3 lbs/inch width (223.1 g/cm width) "90 degree Peel".
Flexible to Rigid: 1.8 lbs/inch(313.2 g/cm width).
Product Contains: 6.6 Nylon hook, Nylon 6.6 Loop Pressure Sensitive Adhesive: Acrylic pressure sensitive adhesive.
Dynamic Shear Test: 4.8 lbs/sq.in. (33N/sq.m).
Temperature: Down to -20 F (-29 C) increases the typical closure strengths.
Thickness: Product thickness is 2.4 mm.
Uses: Automotive, air craft, electronic and business equipment applications. Useful for anti-scratch surface, automotive interiors, medical braces, covers, attaching accessories and equipment, vibration and sound dampening equipment, watercraft and marine applications.
Water Resistant: Closure strength of nylon hook and loop fasteners decreases after prolonged exposure to water mainly due to absorption by the cut ends of hook products. Closure strength is regained when dried. The adhesive has been formulated to withstand typical outdoor temperature, humidity and ultraviolet exposure conditions.
Units per Measure: One roll (50 yards per roll)