Silver Transfer Film 1/2"
Description: #8710 1/2" Silver Transfer Trim Iron On Fabric. Scotchlite Reflective Transfer film is composed of wide angle, exposed retro-reflective lenses bonded to a heat activated polyurethane adhesive.
Abrasion: 5000 Cycles
Appearance: Daytime Color: Silver Reflected Color: White
Application: For best results, apply to light and medium weight fabrics. Application on fabrics is best achieved over a flat surface where uniform heat and pressure can be applied. Avoid applying over seams. Cutting: Die-cutting is recommended, although film can also be hand-cut, guillotined, kiss-cut or plotter cut. NOTE: Whenever two or more pieces of any fabric are used together on a single surface or as a set, they should be matched to assure uniform day color and nighttime reflectivity. NOTE: The protective white paper liner should not be used as the carrier when applying plotter cut and images.
Care: Care guidance, in order of preference: For best retention of brightness 1. Wash: Machine wash warm, 40 C (105 F) 2. Bleach: Only non-chlorine bleach when needed. Dry: Tumble dry low Iron: Use cool iron, 110 C (230 F) DryClean: Dry-clean, normal cycle. NOTE: Repeated dry cleaning may cause slight stiffening, but the reflectivity will n ot be affected.
Cautions: Note that while many fabrics may be used as lamination substrates, nylons and fabrics treated with a durable water repellent (DWR) finish are difficult to adhere to and are not recommended. Note also that this product has a recommended shelf life of one year, and should be stored in a cool dry area. Rolls should be stored on a rod pipe through the core. Cut sheets may be stored flat. Handling precautions for Hot and Humid Environments: Scotchlite silver transfer film contains an aluminium layer as part of its construction. Blemishing of this aluminium layer can occur if the paper carrier is removed and the front surface of the product has direct contact from hands during application and is then exposed to hot and humid conditions, greater than 80 degrees F and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect the performance of the product. While use of Scotchlite reflective material does greatly enhance visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions.
Features: Very good stretch properties. Provide a high attention value when visibility is poor, especially at night. The film will provide attention value when visibility is poor, especially at night. The fluorescent colour is especially conspicuous under daytime conditions. It will remain highly reflective when viewed at wide entrance angles. The effective performance life of the film is such that it should retain good day colour and nighttime reflectivity for the life of the garment to which it is applied. Cold Fold: -20 C This is a highly reflective material with wide angle reflectivity designed to greatly enhance the night visibility of the wearer. A removable plastic liner protects the heat activated (iron-on) dry adhesive on the back of the film. Scotchlite 8710 is suitable for light to medium weight fabrics and has very good stretch properties. Certification EN471. High brightness at wide angles. Dry cleanable. Durable. Screen printable. Available in custom widths. This film will appear a brilliant silver-white when viewed by a driver using vehicle headlights. It will remain highly reflective when viewed at wide entrance angles. The effective performance life of the film is such that it should retain good day color and nighttime reflectivity for the normal use life of the garment to which it is applied. Performance can vary depending upon actual use,exposure conditions and maintenance. Care Instructions, in order of preference: 1. For the best retention of brightness, machine wash warm.
Tumble dry low. 2. Damp wipe using warm water detergent. Rinse thoroughly. 3. Professionally dry clean, tumble dry warm. Note repeated dry cleanings may cause slight stiffening, but the reflectivity will not be affected.
Product Contains: Retro-reflective lenses bonded to a heat activated polyurethane adhesive
Storage: Store in a cool dry place. Rolls should be stored on a rod or pipe through the core. Cut sheets may be stored flat.
Uses: Uniforms, accessories, outerwear, active-wear, headwear, hand-wear, backpacks, arm bands, straps, belts, cut out letters and numbers. Iron on film for reflective protection on garments and other fabric products. Safety Vests, Harnesses, Uniforms, Jackets, Outerwear, Arm Bands, Head wear, Hardware, Accessories, Rainwear, Backpacks, Strap Belts cut out letters and numbers, and patches and crests.
Unit of Measure: One roll (109 yards per roll, pricing per yard)